RM Stator Stator Pickup Pulsar Coil for Can-Am DS 650 Baja / Baja X 2000-2007

Brand new pick up coil

• We offer a brand new pickup/pulser coil for you to repair your stator.
• Often unavailable from the OEM manufacturer
• All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Specifications

Dimensions:
Height: 22 mm
Length: 25 mm
Width: 23 mm
Bracket center to center: 35 mm
Wires length pickup coil to grommet: 25 mm
Wires length grommet to plug: 400 mm

Other specifications:
Number of wires : 2
Number of plugs: 1
Number of pins: 2

Wire to wire resistance:
Green/White to Blue/Yellow = 295 ohms +/-20%

Interchange Part Nº

• 711265153
• 420265153
• 711265156

Installation

Not following these instructions may result in damaging the part or other components on your vehicle.

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
• If no spark or erratic spark, switch the wires at the plug.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.