RM Stator Pickup Pulsar Coil for Can-am Traxter / Traxter XT / Traxter Max XT / Traxter XL 500 650 cc 1999-2005

Brand new pick up coil 250 ohms

• We offer a brand new pickup/pulser coil for you to repair your stator.
• Often unavailable from the OEM manufacturer
• The fixing bracket is not included, you need to re-install your OEM fixing bracket
• All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Specifications

Dimensions:
Height: 27 mm
Length: 22 mm
Width: 21 mm
Bracket center to center: N/A
Wires length : 225 mm

Other specifications:
Number of wires : 2
Number of pins: N/A

Wire to wire resistance:
Blue to White = 245 ohms+/-20%

Interchange Part Nº

• 420296321

Installation

Not following these instructions may result in damaging the part or other components on your vehicle.

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
• If no spark or erratic spark, switch the wires at the plug.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.