RM Stator Voltage Regulator Rectifier for Honda CB 350 / 360 | CL 350 / 360 Scrambler | CJ 360 T 1968-1977 | # 31700-358-305

Brand new aftermarket voltage regulator rectifier

• Direct replacement to your original unit.
• Plug-and-play, direct fit, easy installation.
• No assembly required
• Higher grade of electric components.
• Improved heat sink and charging capabilities
• The quality exceeds the OEM equipment
• All products shipped are tested

All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

Specifications

Dimensions :
Width : 58mm
Length : 68mm
Height: 25mm
Fixation holes center to center : 53mm
Wires length: 300mm 600mm

Other specifications :
Number of wires: 4
Number of plugs : 4
Number of pins : 4

Interchange Part Nº

• 31700-358-305
• 31700-358-013
• 31700-358-003

Installation

Before installing your new voltage regulator rectifier;

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors.

Please Note :This unit replaces BOTH your original separate regulator and rectifier. Both original parts will need to be removed. It will require a new mounting location, bracket as it is not a direct fit for the OEM mounting location of either original part.

To connect:

• The PINK wire from the stator goes to either regulator YELLOW wire.
• The YELLOW wire from the stator goes to the other regulator YELLOW wire.
• The RED/WHITE wire from the bike's harness goes to the regulator RED wire.
• The GREEN wire from the bike's harness goes to the regulator GREEN wire.

Please secure the other unused wires from removing the original components.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.